⚒️ HWID Spoofer Setup Guide

Follow these steps carefully to set up HWID Spoofer successfully.

Important Information

Temp Spoofer: Temporary hardware ID changes that reset after reboot. Includes trace cleaner. Perfect for temporary needs.

Permanent Spoofer: Permanent hardware ID changes that persist after reboot. Lifetime version includes trace cleaner.

Note: For COD/BO7, you must enable Hyper-V in the loader settings.

1Download Requirements

Loader Download

Download the main loader file:

Download Loader

Required Software

Install these required components before running the spoofer:

WinRAR DirectX VC++ Redistributable Windows Defender

2Disable Security Software

IMPORTANT: Disable all antivirus and security software before running the spoofer:

• Windows Defender
• Third-party antivirus (Norton, McAfee, Avast, etc.)
• Windows Firewall
• Real-time protection

Warning: Security software will interfere with the spoofer operation and may cause failures.

3Disabling VPNs

While spoofing please make sure all VPN services are off and not running if they are this can lead to bluescreens. Once you are successfully spoofed you can enable a VPN with no issues.

Critical: Running VPN services during spoofing can cause system bluescreens. Disable all VPNs before proceeding.

4Disabling BIOS Settings

In order for the spoofer to run correctly you will need to disable these options in your BIOS:

Disable:

• Hyper-V
• SVM (Secure Virtual Machine)

Enable:

• Virtualization

Note: This will vary between device to device so we recommend watching a YouTube video on how to disable these settings. You will not be allowed to proceed past the spoofer requirement checks with these off.

5Run the Spoofer

1. Right-click on the spoofer executable
2. Select "Run as Administrator"
3. If prompted by Windows SmartScreen, click "More info" then "Run anyway"
4. Follow the on-screen instructions in the spoofer interface
5. For Temp Spoofer: Changes will reset after reboot
6. For Permanent Spoofer: Changes persist after reboot

6Verify Your Spoofed HWID

Use the built-in HWID checker to verify your changes:

• Check Storage Device IDs
• Verify Network Adapter changes
• Confirm Processor information
• Review System Serial Numbers
• Check Windows Licensing

All hardware identifiers should show new randomized values after spoofing.

⚠Troubleshooting

Spoofer not working or failing

Make sure ALL antivirus software is disabled
Run as Administrator (required)
Disable Windows Defender Real-time Protection
Close all games before running spoofer
Restart computer and try again

Changes not persisting (Permanent Spoofer)

Ensure you're using the Permanent Spoofer, not Temp
Run the spoofer again as Administrator
Check if any system restore or protection is enabled
Verify changes using the HWID Checker tool

COD/BO7 specific issues

Enable Hyper-V option in the loader settings (required for COD/BO7)
Restart computer after enabling Hyper-V
Run spoofer before launching the game
Make sure game anti-cheat is not detecting old HWID

Trace cleaner not working

Trace cleaner is included with Temp Spoofer and Permanent Spoofer Lifetime
Close all games and applications
Run the cleaner as Administrator
Wait for the process to complete (may take 2-3 minutes)

Need Help?

Join our Discord community for 24/7 support and updates

Join Discord Support